# Is the cockpit accurate?

**URL:** <https://forum.flyinside-helis.com/t/is-the-cockpit-accurate/193>\
**Category:** General Forum\
**Created:** [May 3, 2021, 9:20am UTC](https://forum.flyinside-helis.com/t/is-the-cockpit-accurate/193 "2021-05-03T09:20:41Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Altersbegrenzung](https://forum.flyinside-helis.com/letter_avatar_proxy/v4/letter/a/34f0e0/32.png) [@Altersbegrenzung](https://forum.flyinside-helis.com/u/Altersbegrenzung)\
**Post date:** [May 3, 2021, 9:20am UTC](https://forum.flyinside-helis.com/t/is-the-cockpit-accurate/193/1 "2021-05-03T09:20:41Z")

</div>

Hi,

this might be a stupid question but is the cockpit really accurate or is it a bit simplified?  
When looking at old pictures of the real B47 the cockpit is never the same, but there are technically always the same switches. Some of these switches, like the ones for the Hydraulics or the Intercom seem to be missing in the sim model. Also, as there is no govenor in the real Helicopter why is there a switch on the collectiv?

I’m really no criticizing, just wondering.

Altersbegrenzung

---

<div class="post-metadata">

**Author:** ![TonyF](https://forum.flyinside-helis.com/user_avatar/forum.flyinside-helis.com/tonyf/32/124_2.png) [@TonyF](https://forum.flyinside-helis.com/u/TonyF)\
**Post date:** [May 3, 2021, 9:25am UTC](https://forum.flyinside-helis.com/t/is-the-cockpit-accurate/193/2 "2021-05-03T09:25:03Z")

</div>

Hydraulics were in later models. Every single Bell 47 is different, there are so many different and personal variations we went for almost “factory” fresh as such, she is from the 60’s and has a standard panel. As for the govenor, we added a switch to aid with flying for the wide variety of skill levels our hobby has, turn it off, ignore it and fly with throttle, its a handful. 😉

Hope that helps ?

Tony

---

<div class="post-metadata">

**Author:** ![Altersbegrenzung](https://forum.flyinside-helis.com/letter_avatar_proxy/v4/letter/a/34f0e0/32.png) [@Altersbegrenzung](https://forum.flyinside-helis.com/u/Altersbegrenzung)\
**Post date:** [May 3, 2021, 9:29am UTC](https://forum.flyinside-helis.com/t/is-the-cockpit-accurate/193/3 "2021-05-03T09:29:43Z")

</div>

That definitly did help. Sounds like a great approach to development.

Thank you for the quick response and an awesome MSFS Addon.

Altersbegrenzung

---

<div class="post-metadata">

**Author:** ![TonyF](https://forum.flyinside-helis.com/user_avatar/forum.flyinside-helis.com/tonyf/32/124_2.png) [@TonyF](https://forum.flyinside-helis.com/u/TonyF)\
**Post date:** [May 3, 2021, 9:31am UTC](https://forum.flyinside-helis.com/t/is-the-cockpit-accurate/193/4 "2021-05-03T09:31:58Z")

</div>

You are most welcome 🙂

Ich wünsche ihnen einen wunderbaren Tag !

Tony

---

<div class="post-metadata">

**Author:** ![Implicit](https://forum.flyinside-helis.com/letter_avatar_proxy/v4/letter/i/6a8cbe/32.png) [@Implicit](https://forum.flyinside-helis.com/u/Implicit)\
**Post date:** [May 3, 2021, 5:25pm UTC](https://forum.flyinside-helis.com/t/is-the-cockpit-accurate/193/5 "2021-05-03T17:25:20Z")

</div>

Pretty sure there should be hydraulics on the G’s (It _is_ the later variant).  
I have flown it without hydraulics and it’s not a lot of fun. (But still not as hard as this sim model).

---

<div class="post-metadata">

**Author:** ![TonyF](https://forum.flyinside-helis.com/user_avatar/forum.flyinside-helis.com/tonyf/32/124_2.png) [@TonyF](https://forum.flyinside-helis.com/u/TonyF)\
**Post date:** [May 3, 2021, 6:00pm UTC](https://forum.flyinside-helis.com/t/is-the-cockpit-accurate/193/7 "2021-05-03T18:00:30Z")

</div>

Bell 47G-2A1  
This is the first helicopter in the Model 47 Series designed for extended flight range. It is equipped with 61-  
gallon fuel tanks, extended center frame, relocated oil tank, -21 or -23 metal blades, a wide cabin to better  
handle two passengers and pilot, and a longer overall length. It uses the Lycoming 260HP VO-435-A1D  
engine. The G-2A1 was originally manufactured with the standard square landing gear configuration.  
The standard rotor blades were the -21s, but -23s could be used. Both versions are identical, the exception  
being that the -23s are fitted with nine-pound weights in the blade tips for increase inertia. If installed, the  
helicopter required an upgrade to add hydraulic boost to the collective. This was needed due to the additional  
weight of the blade tips and to ease pilot workload when pulling pitch.

Tony

---

<div class="post-metadata">

**Author:** ![Implicit](https://forum.flyinside-helis.com/letter_avatar_proxy/v4/letter/i/6a8cbe/32.png) [@Implicit](https://forum.flyinside-helis.com/u/Implicit)\
**Post date:** [May 3, 2021, 6:15pm UTC](https://forum.flyinside-helis.com/t/is-the-cockpit-accurate/193/8 "2021-05-03T18:15:26Z")

</div>

Erhh, the _cyclic_ has hydraulics.

 ![](https://blade7.starweb.net/uploads/default/original/1X/a8c05414c2ceffe757bf02b276a5906d01debd18.jpeg)
